Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
45
Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
2
Number of retaining screws
3
Number of extraction threads
1)
Retaining screws
a
8,2 mm
Fixing holes in inner ring
C
20 mm
D1
486 mm
d1
9,3 mm
Fixing holes in inner ring
d2
15 mm
Fixing holes in inner ring
d3
9,3 mm
Fixing holes in outer ring
G
M12
Extraction thread
H1
42,5 mm
H2
22,5 mm
J
415 mm
Fixing holes in inner ring
J1
505 mm
Fixing holes in outer ring
t
48 X 7,5°
Quantity of pitches X angle of pitches
Including retaining screws and extraction threads
m
33 kg
Mass
MA
34 Nm
Screw tightening torque
Tightening torque for screws to DIN 912, grade 10.9.
Ca
214000 N
Basic dynamic load rating, axial
C0a
1540000 N
Basic static load rating, axial
Cr
121000 N
Basic dynamic load rating, radial
C0r
390000 N
Basic static load rating, radial
nG
650 1/min
Limiting speed
For high operating durations or continuous operation, please contact us.
caL
7800 N/µm
Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL
2000 N/µm
Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL
195000 Nm/mrad
Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
